Stylish Kitchen Doors - Care and Maintenance

As with all timber based items our products should not be stored or installed in a newly plastered or damp environment. To clean door surfaces use a soft clean cloth, warm soapy water should be used to dampen the cloth (not wet). Dry off with a soft cloth. Do not use any aggressive cleaning liquids or items such as Brillo pads.

To avoid damage by excessive heat please follow these simple instructions.

When installing doors adjacent to ovens always ensure that doors are shielded by using heat deflector strips.

Never use any appliance that generates high levels of heat or concentrated steam (such as a toaster, kettle, or pressure cooker) directly under, or adjacent to, a vinyl wrapped component.

Clean with warm water, a clean rag or microfibre cloth, a soft sponge or soft brush. Use normal domestic cleaners or soaps that have no abrasive ingredients. Then wipe with fresh water, removing all traces of the cleaning agent, to prevent streaks forming. Dry the surface with a clean, absorbent cloth or paper towels.

The following cleaning agents should not be used under any circumstances:

Scouring and abrasive agents (abrasive powders, scouring pads, steel wool)

Polish, washing powder, furniture cleaner, bleach

Detergents with strong acids and acidic salts

Steam cleaning equipment

After removing the protective film please allow the surface to cure for at least seven days before cleaning or wiping. To clean the surface of the doors, wipe using a soft cloth with a mild, non-abrasive, dish-washing detergent diluted in warm water. The mix should be 1% detergent to 99% warm water. You should never use any vinegar based detergents, solvents, abrasive detergents, white spirit or furniture polish.

Polishing High Gloss vinyl's will leave minor scratches and polish marks, this is normal with this type of finish.